ARMYCOR AIR
Evaporative corrosion inhibitor bag for ferrous and non-ferrous metals
ArmyCor AIR belongs to a group of anti-corrosion agents known as "clean" because the protection is provided without creating classical strong coatings of oil preservatives, greases and waxes. The characteristic feature of these inhibitors is their ability to evaporate continuously and for a long time in the vicinity of the protected products, and, in the case of condensation, create a non-corrosive atmosphere.
Evaporative corrosion inhibitor ArmyCor AIR has an enhanced corrosion efficiency not only for the protection of ferrous metals but also for the protection of non-ferrous metals and their alloys, especially copper, brass, bronze, and aluminum alloys, etc.
ArmyCor AIR has the ability to vaporize at room temperature. The evaporated molecules are mixed with the air that brings them to the surface of the metal product to be protected. There, the inhibitor molecules adhere to the metal by chemical and physical bonds. Once the surface molecular layer on the metal is formed, it has several effects. It prevents water vapor (air humidity) from entering the metal because corrosion reactions occur several times faster in wet conditions. At the same time, it changes the reaction stability so that the corrosive environment does not have enough energy to react with the metal. In addition, the metal is further protected as the pH is changed to alkaline, which aids in low reaction rates.
- Up to 60 months of protection
- Suitable for ferrous and non-ferrous metals
- Biodegradable within 28 days
- Contains no dangerous substances silicates, phosphates, nitrites or heavy metals
- Clean conservation - it is not necessary to subsequently clean and remove the product
- Easy application of the product
- High inhibitory efficacy
- Safe preservation
Fields of application
- Long-term storage of metal materials
- Inter-operative preservation
- Shipping preservation for road, sea and air transport
- Electrical and electronic devices - protects the entire interior of the device without the negative effects of contact inhibitors
- Army and Police - Suitable for storing weapons, ammunition and military equipment
Methods of application
A bag of volatile corrosion inhibitors (VCI) 5g ArmyCor AIR provides protection against corrosion in a closed space of a volume of 20l. We recommend using vapour breathing packaging e.g. nonwoven fabrics made of spun-bond or another suitable material which is permeable to water vapour and prevents the ingress of water from the outside. Plastic film packaging is not suitable, as it does not let the structure "breathe out" the moisture and speeds up corrosion. If plastic film packaging is necessary, it must not be hermetically sealed. To achieve the highest efficiency of inhibitor ArmyCor AIR spread the bags 30 cm from each other. After use, leave at least 20 hours in a temperature of 20°C after application and packaging. VCI AirCor bag should always be changed so that 100% conservation and functionality is achieved.
Custom package
5 g po 10 pcs, 5 g po 100 pcs, 5 g po 1.000 pcs
Production to order:
25 g po 10 pcs, 25 g po 50 pcs, 25 g po 200 pcs