ARMYCOR CLP
Cleaning, lubricating and protect product
ArmyCor CLP is a new generation protective cleaner for professional weapon care. It ensures the best protection against dirt, wear and moisture (including salt water) and can be used whenever you are looking for professional care for metal components. It is a low viscosity product based on highly refined liquid hydrocarbons, anticorrosion inhibitors, special lubricants and other additives. Conforming to the highest standards of the US military specification MIL-PRF-63460E, the CLP incorporates three basic functions:
- It disperses metal residue from bullets in barrels.
- Removes sediments and gunpowder residue.
- Dissolves previous preservatives and applied lubricants.
ArmyCor CLP provides maximum removal of friction between moving components and medium-term protection against corrosion. ArmyCor CLP will Clean, Lube and Protect. CLP formula dries off completely, leaving the protected surface grease-free.
ArmyCor CLP has two drying phases: The product has a very low viscosity and spreads evenly across all gaps in the metal, while intensively removing dirt from your weapon's surfaces. In the second and drying phase, the viscosity increases. The grease and dirt is solvated, allowing excess to be wiped away with an absorptive cloth with ease.
- Tested by professional units.
- High cleaning efficiency
- Excellent clinginess, the product also gets into poorly accessible places
- Removes previously used preservatives and lubricants
- Micro-layer special lubricant reduces the friction of the various moving parts to a minimum level
- The product repels water and protects against corrosion
- Protects against dust
- Removes and prevents oxidation
- It does not contain teflon or silicone lubricants
- Operating range: -50 / +258 ° C (-58 / +496 ° F)
- Low consumption, about 30 ml per 1m2
- Long-term efficiency and protection
- Meets the requirements and specifications MIL-PRF-63460
Methods of application
ArmyCor CLPis applied directly to the cleaned surface or with a clean and absorptive fibreless cloth. Small parts can be completely immersed into the product. If the absorptive cloth or other material is used, simply wipe the surface with it. It is desirable to let the formula work for a few minutes and then wipe any dissolved and dispersed dirt away. When cleaning has completed, wipe the surface with a clean cloth soaked in ArmyCor CLP once more. Cloths and other materials should not dribble when pressed. Dry absorptive materials may wipe the protective formula away from the weapon completely. The weapon must be dried out before storage.
Putting the weapon in a plastic foam case before it has dried out may neutralize the preservative component of the product. The manufacturer is not liable for any damage caused by not complying with the application procedure.
Custom package
50 ml bottle dropper, 150 ml mechanical spray, 150 ml aerosol spray
Production to order:
100 ml bottle dropper, 250 ml and 400 ml aerosol spray, 500 ml and 1 l bottle, 5 l and 25 l canister, 200l barrel
Warning
ArmyCor CLP has a high degreasing effect in its first phase. We recommend using petroleum resistant gloves during work and reparation cream afterwards. The skin may crack after being degreased. The product is a Class 2 flammable material. Do not smoke, or let the product be near naked flames or sparks. Do not inhale the vapor when using mechanic or pressurized spray.